31
Power supply
Supply power to your projector by one of the following methods.
• (Recommended) Via the provided power adapter and power cord.
• Via a power bank / power adapter / USB-C cable with USB-C power
delivery function which are all certified by USB-IF and provides at least
45W (20V-2.25A). See PD in information in "Specifications" on page
71 and "Charging the battery" on page 31 for details.
• Via the built-in battery after it is fully charged.
The default screen brightness varies by power supply method. You
can manually adjust the brightness as instructed in "Adjusting screen
brightness" on page 45.
Note
• The USB-C port is able to provide power to connected devices. See "Power delivery to a USB-C
device" on page 61 for more information.
• The USB-A port is able to provide power to connected devices. See .
• The supplied power adapter is recommended to avoid possible dangers such as electric shock
Charging the battery
1. Make sure the appropriate plug has been properly assembled, and then
connect the adapter to the power adapter port.
2. Connect the power cord to a power outlet.
The power LED indicator will illuminate according to its charge status, for
a full charge wait until the indicator lights up solid green (see "Power LED
indicator" on page 34 for more information on LED behavior). It takes
about 3 hours before initial use.
The charging time increases if you prefer to use the projector while
charging. Keep the projector in a cool, ventilated place and charge until the
To Next Page
Loading...
