58
Connecting the projector to an
external Bluetooth speaker /
headphone
Available only when the projector is swtiched to Google TV.
1. Go to > All settings > Remotes & Accessories > Pair accessory on
your projector.
2. Activate Bluetooth-pairing mode on the speaker or headphones.
3. Select the speaker / headphones from the device list.
4. Select Pair.
5. Once the projector and speaker / headphones have successfully
connected, you can output the audio from your projector to the speaker
/ headphones.
Note
• This function is available only when the input source is set to Google TV. Even when the projector
is switched to other input sources, such as HDMI, as Google TV is still running in the background,
it will continue to transmit audio from Google TV to the connected Bluetooth device.
• The projector does not support automatic re-connections with previously paired devices. In order
to re-connect to a paired device or connect to another device, repeat the steps above.
Making your projector a wireless
speaker
1. Power on the projector (see "Powering on and initial setup" on page
33).
2. Connect your mobile device and the projector to the same wireless
network.
3. Cast your audio from the mobile device to the projector as instruxted in
"Wireless projection (screen casting)" on page 53.
4. Press and hold on the remote control for 2 seconds to enable audio-
only mode. See "Turning the screen off during music playback" for
details.
5. Launch the music app on your mobile device and use the casting
function through Chromecast as instructed in "Wireless projection
(screen casting)". Find GV01 as the casting device to enjoy music
streaming.
To Next Page
Loading...
