35
Power settings and options for
saving power
To save power, the projector is switched off or powered off automatically
by default.
Time of inactivity Default setting
15 minutes The projector enters networked standby mode.
240 minutes The projector is powered off.
To manually enable networked standby mode, press the power key
on
the remote control / projector for 1 second.
1 second
or
1 second
You can change the networked standby setting from >
All settings > System > Power & Energy > Power & Energy >
Automatically turn off TV when inactive. This setting does not power off
the projector.
To navigate more power menus, go to
> All settings > System >
Power & Energy. Set according to your preferences. Here are some
settings under Power that may help.
Item Descriptions
Sleep Timer
Sets to turn off the projector automatically after the
set time. See "Setting up a sleep timer" on page 51
for details.
To Next Page
Loading...
