BenQ GV50 - Display & Sound

64
Item Options and descriptions
Projection Mode
Decides the installation location of your projector.
See "Choosing a location" on page 27.
Remote Control
Accesses remote control information, including
remote control battery level and firmware upgrade.
Clear Cache
Helps to free memory space to improve projector
performance.
Display & Sound
> All settings > Display & Sound
Item Options and descriptions
Picture
Adjusts picture image settings.
Brightness
Sets screen brightness. See "Adjusting screen
brightness" on page 45.
Picture mode
Sets a proper picture mode for the content.
See "Choosing a proper picture mode for video
streaming" on page 49.
Expert Settings
Adjusts settings to enhance image quality.
Reset to Default
Resets image settings to factory defaults.
Sound
Sets a proper sound mode for the content. See
"Choosing a proper sound mode for video streaming"
on page 50.
Audio Output
Selects the audio format and output delay from the
source device connected to the HDMI port.
When the digital output setting is Auto, the projector
detects the format of input content and set audio
format automatically.