40
Fine-tuning the image clarity
To sharpen the picture, adjust the focus.
• Real-time focus & keystone adjustment: Your projector adjusts focus
and keystone automatically at startup by default. This function will
be performed automatically as well when the projector is moved. To
check/change the auto focus setting, go to
> All settings > Projector
> Focus > Advanced. The effective distance from the projection lens to
the screen is 0.8 ~ 3.2 meters.
• One-click screen adjustment: Press the
button on the remote
control and the projector will automatically focus the image and adjust
keystone. Make sure the full keystone pattern is displayed on the
screen to ensure a successful correction.
• Manual focus: Go to > All settings > Projector > Focus >
Manual Focus. Press up/down keys to make adjustment. When the
focus is completed, press
to leave.
Note
A focus pattern is displayed to ensure image focus adjustment by default. It is recommended to
display the focus pattern for better focus adjusment during video playback in particular. If you
prefer not to be distracted by the pattern during adjustment process, you can manually disabled the
pattern from
> All settings > Projector > Focus > Advanced > Deep Focus Always On.
To Next Page
Loading...
