BENSHAW RSi GX Series User Manual

z Note: 1) Detail description on Common area address 0x0006
z Note 2) The changed value in Common area affects the current setting but returns to the
previous setting when power is cycled or drive is reset. However, changing value is
immediately reflected in other parameter groups even in the case of Reset or Power
On/Off.
z Note 3) S/W version of Common area is displayed in 16 bit, while that of parameter area
is displayed in 10 bit.
135
7 - Remote Communication
Bit Value R/W Name Description
0
1
2
3
4
5,15
0x01
0x02
0x04
0x08
0x10
R/W
R/W
R/W
W
W
-
Stop
Forward run
Reverse run
Fault reset
Emergency stop
Not used
Stop command via communication (0->1)
Forward run command via communication (0->1)
Reverse run command via communication (0->1)
Fault reset command via communication (0->1)
Emergency stop command via communication
(0->1)
Not used
6-7 R
Operating
command
0(Terminal), 1(Keypad), 2(Option), 3(Int. 485)
8-14 R
Frequency
command
A. When operating command is issued via
terminal, keypad or option
0: DRV-00 1:Not used 2:Multi-speed 1 3:
Multi-speed 2
4: Multi-speed 3 5: Multi-speed 4 6: Multi-speed 5
7: Multi-speed 6 8: Multi-speed 7 9: Up 10:Down
11:Up/Down Zero 12:V0 13:V1 14:I 15:V0+I
16:V1+I1
17:Jog 18:PID 19:Communication 20-31: Reserved
Address Parameter Scale Unit R/W Data Value
0x001C Custom Version R Not used
0x001D Trip information-B R
Bit 0: COM (I/O Board Reset)
Bit 1: FLTL
Bit 2: NTC
Bit 3: REEP
Bit 4-15: Not used

BENSHAW RSi GX Series Specifications

General

Brand	BENSHAW
Model	RSi GX Series
Category	DC Drives
Language	English