BestCode NExT 88SHS - Page 116

BestCode Next Series 8 Technical Manual October 2022 Page 102 of 290
4. Inspect the Venturi restrictor
There should be no debris or
clogs visible in any of the ports.
If restrictor cannot be cleaned
with Cleaner, replace the entire
Venturi.
5. Inspect the Venturi Side ports
There should be no debris or clogs
visible in any of the ports.
Some staining is normal.
If side ports cannot be cleaned with
Cleaner, replace the entire Venturi.
6. Re-assemble the Venturi.
The venturi may now be re-installed
into the machine.