BestCode Next Series 8 Technical Manual October 2022 Page 21 of 290
Basic Operations
Power On / Off
Video Link for Power On / Off here: https://youtu.be/dZQiZb9Rusw
Clean Start & Clean Stop are the normal production starts and stops. These use a small amount of makeup per
routine. The software will automatically protect the operator from adding too much makeup. When the
operator is logged in using the Technician Level Password, all Starts & Stops from the Home screen will be clean
stops. This is to help diagnose Clean Start and Clean Stop problems.
Quick Start& Quick Stop are technician tools to quickly start and stop the jet. They do no utilize makeup in the
start, so they will not start or stop as clean as the Clean Start or Stop. The system will intelligenty switch the
Clean Start & Stop method to quick start to prevent the operator from adding too much makeup.
Video Link for Start / Stop Jet here: https://youtu.be/YVJEsJ4pCc8
To Next Page
Loading...