iii
How to use this manual
This manual is intended to be used by BestCode trained distributors. The purpose of this manual is to supplement BestCode
provided training on how to correctly use the Next Series 8 Printer. This manual contains information on how to select the
correct system for an application, performing necessary operations with the printer such as first time start up procedure,
required service routines, navigating and using the interface, how to monitor and diagnose issues with the system, and how
to replace components.
This manual contains several links to Youtube videos on proper maintenance and operation of the BestCode CIJ Printers.
They are throughout the document and should be reviewed. The entire library of support videos can be found here, and
they serve as an excellent supplement to this manual: https://support.bestcode.co/training-videos/
Distributors may contact info@bestcode.co for Technician Level Password.
This manual should not be used by untrained individuals.
BestCode Distributor Training Information
Training Location:
3034 SE Loop 820 Email Info@bestcode.co for training schedule or call (+1) 817-349-8555
Fort Worth TX
76140 USA
International training may be available near you. Email info@bestcode.co for information
To Next Page
Loading...
