BestCode Next Series 8 Technical Manual October 2022 Page 49 of 290
Auto-Encoding Adjust Screen
The adjust screen automatically changes when using Single Sensor or Dual Sensor encoding modes (Setup info Here)
Enter the Auto Encoding Print Speed Screen.
Increases or decreases the height of the
print by increasing or decreasing the
strength of the high voltage field in the
printhead.
Rotates the direction that the print
appears on the product
Normal, Mirror, Flip, Mirror Flip
Each settings increases the width of the
selected field by adding more printed
drops. Makes darker print.
Faster than Fast,
Good Quality
Fastest Print,
Readable Code
Increases the space between characters
in the selected field.
Specifies the delay between repeated
prints.
To Next Page
Loading...
