BestCode NExT 88SHS - Cleaning the Printhead

BestCode Next Series 8 Technical Manual October 2022 Page 80 of 290
11. Press OK on the Success screen prompt (11-0001).
Cleaning the Printhead
Manual Cleaning
Regular Maintenance
Printhead should be manually cleaned weekly, to ensure there is no serious build-up of ink or
dust in the printhead.
Printhead Fault
Backflush nozzle should be performed after any HV fault, Phase Fault, Gutter Fault, or Charge
Fault.
Bad Print
Backflush nozzle should be performed if the print looks bad.
How to wash the Printhead
Be familiar with proper safety information for handling fluids.
1. Place the Printhead into the Printhead Clean Station (P/N 40-
0020-01)