BestCode Next Series 8 Technical Manual October 2022 Page 79 of 290
How to Add Makeup
Be aware of all safety warnings regarding the handling
of Makeup. See here for handling info.
Video Guide Here: https://youtu.be/X0NadNkWcAU
1. Place 1 capped bottle of Makeup in the Makeup
Smartfill Cup.
2. Make sure the SmartFill symbols are aligned.
3. Press the Makeup Status button on the Screen.
4. This process works for Low, Empty, and OK
situations.
5. Wait for the Success prompt (11-0001).
6. DO NOT PRESS OK.
7. Remove the Makeup bottle, and remove the cap.
8. Insert the bottle and press firmly to break the foil
seal.
9. Wait for 1-2 minutes for the bottle to drain.
10. Discard the empty Makeup bottle in accordance
with local regulation.
To Next Page
Loading...
