BestCode Next Series 8 Technical Manual October 2022 Page 278 of 290
AirFlow™ Printhead Positive Air Kit
• BestCode’s AirFlow™ Technology together with auto cleaning printhead delivers an extended operation time
between manual printhead cleanings.
• Up to 500 hours of operation between manual printhead cleanings.
When to use an AirFlow™ Printhead Positive Air Kit:
• Always – improves performance and extends time between manual printhead cleaning.
• If machine is in poorly controlled environment (Factory open to yearly weather)
• Freezer rooms.
• High Steam areas or areas that are steam washed.
• Dusty and Dirty environments.
• Remedy bearding situations.
• AirFlow™ Printhead Kit can be installed on any Series 8 machines (81, 82, 86, 87, 88, 88S).
• Field installation possible.
To Next Page
Loading...
