Big Backyard F23475 - STEP 32 Attach Glider and Swings

using 2 5/16” flat washer and 1 5/16 lock nut per assembly.
Components
1X Glider Swing
B
: Install the Glider Rope and Chain Assemblies, 2 per Glider Ends
L6
Hardware
2X Glider End
Glider
4X Glider Rope & Chain Assembly
and the Long Belt Swings to the Bolt Hangers.
1X Glider Seat
Long Belt Swings
12X 5/16" Flat Washer
2X Long Belt Swings
2X
6X 5/16" Lock Nut
Hex Bolt 5/16 x 6" (Zinc)
C
: Connect the Glider to the Glider Hangers
A
: Attach 1 Glider End to the Glider Seat using 1
(L6)
5/16 x 6” zinc
hex bolt (with 2 flat washers and 1 lock nut). Attach the other Glider
End to the other side.
Warning!
Bolt must not
exceed 1/2 thread past the nut
STEP 32 Attach Glider and Swings
L6
Glider Ends
Glider Seat
5/16" Lock Nut
4 PLACES
5/16"" Flat Washers
Glider Rope and
Chain Assembly
Use on both
ends of Glider
47