KBW (E6) 11/2016 page 44/147
“Program start” menu.
Select the field “Program start”.
“Program start” menu.
Enter the desired program start time and press
the Confirm icon. The program delay time until
program start begins.
The program end is adapted automatically de-
pending on the entered program duration.
When all settings have been completed, press
the Confirm icon.
Normal display.
Information on the bottom of the screen indi-
cates the currently running program and the
time already passed. The grey bar shows how
much time of the whole time is elapsed. If
program duration has been set to infinite, the
grey bar is not displayed.
9.1.1 Performance during program delay time
During the configured program delay time until program start, the controller equilibrates to the current
setpoints of Fixed value operation mode. Modifications of these setpoints are effective. When the config-
ured moment for program start is reached, the program delay time ends and the program starts running.
To Next Page
Loading...
