KBW (E6) 11/2016 page 59/147
10. Week programs
The MB2 program controller permits programming week programs with real-time reference. It offers 5
week program places in total with up to 100 shift points for each week program.
Path: Main menu > Programs> Week program
10.1 Starting an existing week program
Normal display.
Press the Program start icon.
“Program start” menu
“Program start” menu.
In the field “Program type” select the setting
“Week program”.
“Program start” menu.
In the field “Program” select the desired pro-
gram.
There are no further settings available in the “Program start” menu for week programs, as they are need-
ed only for time programs.
There are the following possibilities:
Press the Confirm icon to take over the entries and exit the menu. The program starts running.
Press the Close icon to exit the menu without taking over the entries. The program will not start.
To Next Page
Loading...
