KBW (E6) 11/2016 page 92/147
“Date and time” submenu.
In the field “Daylight saving time switch” select
the desired setting “Automatic” or “Inactive”.
“Date and time” submenu.
Select the desired time zone and press the
Confirm icon.
“Date and time” submenu.
Select the desired start of the daylight saving
time.
“Date and time” submenu.
Select the desired end of the daylight saving
time and press the Confirm icon.
There are the following possibilities:
Press the Confirm icon to take over the entries and exit the menu.
Press the Close icon to exit the menu without taking over the entries.
To Next Page
Loading...
