Binder CB Series - Understanding Residual Risks

CB / CB-UL, CBF / CBF-UL (E7) 01/2022 Page 12/199
CO
2
incubator CBF CO
2
incubator CBF-UL
Figure 2: Position of additional labels on the CBF / CBF-UL
Keep safety labels complete and legible.
Replace safety labels that are no longer legible. Contact BINDER service for these replacements.
1.6 Type plate
Position of type plate: left chamber side (seen from front), at the bottom in the middle
Figure 3: Type plate (example of CB 170 regular chamber)
Indications of the type plate (example)
Indication
Information
BINDER
Manufacturer: BINDER GmbH
CB 170
Model designation
CO2 incubator
Device name
Serial No.
00000000000000
Serial no. of the chamber
Built
2022
Year of construction
Nominal
temperature
180 °C
356 °F
Nominal temperature
IP protection
20
IP type of protection acc. to standard EN 60529
Temp. safety device
DIN 12880
Temperature safety device acc. to standard DIN 12880
Class
3.1
Class of temperature safety device
Art. No.
9640-0009
Art. No. of the chamber
Var.
9640-0025
Variant No. / Equipment
Project No.
---
Optional: Special application acc. to project no.
1,30 kW
Nominal power
200-230 V / 50 Hz
Nominal voltage range +/-10%
at the indicated power frequency
200-230 V / 60 Hz
1 N ~
Current type
5,7 A
Nominal current
Nominal temp.
180 °C
1,30 kW / 5,7 A
356 °F
200-230 V / 50 Hz
IP protection
20
200-230 V / 60 Hz
Safety device
DIN 12880
1 N ~
Class
3.1
Art. No.
9640-0009
Var. 9640-0000
Project No.
Built
2022
CO2 incubator
BINDER GmbH
Im Mittleren Ösch 5
78532 Tuttlingen / Germany
www.binder-world.com
CB 170
E7
Serial No. 00000000000000
Made in Germany