Binder CB Series - Equipment and Options (Extract)

CB / CB-UL, CBF / CBF-UL (E7) 01/2022 Page 182/199
CBF / CBF-UL: Bringing a source of humidity into the inner chamber will affect the minimum
humidity specification
24.5 Equipment and Options (extract)
To operate the chamber, use only original BINDER accessories or accessories / components
from third-party suppliers authorized by BINDER. The user is responsible for any risk arising
from using unauthorized accessories.
Regular equipment
Multifunction touchscreen controller MB2 for temperature, CO
2
, O
2
(chamber with O
2
control) and
humidity (CBF / CBF-UL)
CO
2
infra-red absorption measuring system
Silicone jacket heating
Hot-air auto sterilization
Gas mixing head
Permadry™ humidity system
Weldless deep-drawn polished inner chamber made of stainless steel 1.4301/V2A, polished
FailSafe – Electronic error auto-diagnosis system
Zero-voltage relay alarm output with DIN socket (6 poles), DIN plug included
Lockable door
Tightly closing inner glass door
3 perforated shelves, stainless steel 1.4301/V2A
Overtemperature safety controller class 3.1 acc. to DIN 12880:2007
CBF / CBF-UL: Microprocessor controlled humidifying system
Chamber with O
2
control: O
2
control in the hypoxic control range 0.2 to 20 vol. % O
2
.
Ethernet interface for computer communication
Options / accessories
Perforated shelf, stainless steel
Perforated shelf, full copper
Chamber with O
2
control:
Alternative control range 10 to 95 vol. % O
2
(available via BINDER
INDIVIDUAL Customized Solutions)
Divided inner door with cell therapy compartmentation, stainless steel, 4 times (size 56), 6 times (size
170), 8 times (size 260)
Shelves for divided inner door, stainless steel
Partition wall for cell therapy compartmentation
Quick sample access
Stacking stand with castors lockable by breaks (incubator size 170 / 210)
Stacking adapter for direct, thermally decoupled stacking
Base with castors
Stacking adapter for combination C / C-UL 150 on top of CB / CB-UL / CBF / CBF-UL 170
Silicone access ports closable with 2 silicone plugs
BINDER Gas Supply Service: External CO
2
bottle changer for CO
2
, O
2
,
or N
2
Connection kit for CO
2
, O
2
or
N
2
cylinder
Water tight internal socket 230 V (max. 3 A), with turn-off switch (available via BINDER INDIVIDUAL
Customized Solutions)
Analog output temperature and CO
2
4-20 mA 4-20mA with DIN socket (6 poles), DIN plug included
BINDER Data Logger kit for temperature: T 220 (chamber values), and for temperature / humidity: TH
70 (chamber values) or TH 70/70 (chamber and ambient values)