BIXOLON SRP-E770III - General Specifications; Hardware Specifications

SRP-E770III
3-2 General Specifications
3-2-1 Hardware Specifications
Item Description Remark
Product
• SRP-E770III Label Printer
Processor
• Atmel AT91SAM9G45 (32 bit)
Memory
• SRAM : 64MB DDR2 SDRAM (W9751G6KB-25)
• Flash ROM : 128MB NAND Flash (F59L1G81LA)
Serial Interface
(RS-232C)
• Flow Control
1) Xon/Xoff (S/W Control)
2) RTS/CTS (H/W Control)
• Baud Rate : 9,600 / 19,200 / 38,400 / 57,600 /115,200 bps
• Connector Type : DB9P(Female)
USB Interface
• Version : V2.0
• Transfer Type : BULK
• Speed : 480M bps, High-Speed
• Power : Self-powered
• Connector Type : USB B type
Ethernet Interface
• Network : 10/100 Base-T, Auto Detection
• Protocol : TCP, UDP, IP, ICMP, ARP
• Flow Control : Hardware(RTS/CTS)
Printing Method
• Direct thermal Printing
Printing Speed
• Max 127mm/sec (Max 5 ips)
Power Consumption
• Operation : Max. 230.5 W (100% duty )
• Idle(Ready mode): 1.12 W
AC/DC Adapter
• Input : AC100~240V 50/60Hz 1.5A
• Output : DC24V, 2.5A
Peak Load : 13A
Environment
Condition
• Operating Temperature : 0°C ~ 40°C
• Storage Temperature : -20°C ~ 60°C
• Operating Humidity : 10% ~ 80% RH
• Storage Humidity : 10% ~ 90% RH
Weight
• Approx. 3.0kg (with Packing)
Dimensions(mm)
• 189(W) × 221(D) × 171(H)
Ver. 1.01
- 20 -