BIXOLON SRP-E770III - Paper Specifications; Warranty and Environment Specifications; Tph(Thermal Printer Head) Specifications; Other Component Specifications

SRP-E770III
3-3-4 Paper Specifications
Item Description Remark
Paper Type Direct Thermal
Paper Form Gap, Black Mark, Continuous, Fan-Fold, Notch
Paper Width
Liner : 38.1~106 ±0.5mm
Label : 104 ±0.5mm
Paper Roll Size Max Φ130mm (5.1 in)
Spool Inside Dia. Φ25.4mm (1.0 in) ~ Φ38.1mm (1.5 in)
3-3-5 Warranty and Environment Specifications
Item Description Remark
Life
• Head : 6 months or 25Km (whichever comes first)
Printer Unit
• 15 months
Environmental
Temperature
• Operating : 0°C ~ 40°C • Storage : -20°C ~ 60°C
Humidity
• Operating : 10% ~ 80% • Storage : 10% ~ 90%
No
Condensation
3-3-6 TPH(Thermal Printer Head) Specifications
Item Description Remark
Head Element Structure
• 2 Heaters / Dot
Number of Heat Element
• 832 Dots
Heat Element Pitch
• 0.125 mm/dot, 8dots/mm (203 dpi)
Print Width
• 104mm ±0.2mm
Average Resistance
• 750Ω ± 3%
Operating Temperature
• 5°C ~ 40°C(Max. -5°C ~ 50°C)
3-3-7 Other Component Specifications
Item Description Remark
Paper Feed Motor
• Model : M42SP-6NK
• Voltage : 24Vdc
• Type : BI-Polar
• Resistance : 6Ω
Cover Open
Sensor
• Detector S/W : KFC-V-101(I)
•
Rating : DC 16V
• Contact Resistance : 50mΩ(Max)
•
Operating Force : 61gf (Max)
Gap
Sensor
Up
• InfraRed Emitting Diode (GaAs) • Model : EL-23G
Down
• Reflection Type Photo Sensor • Model : SG-112
Peel Off Sensor
• Reflection Type Photo Sensor • Model : SG-112
Ver. 1.01
- 23 -