BK Precision 4054B User Manual

71
Firmware Update
The software version and configuration file of the generator can be updated directly via USB
flash drive. To update the firmware, follow the steps below:
a. Insert USB flash drive with firmware update file (*.ADS) and configuration file (*.CFG)
to USB host interface on the front panel of the generator.
b. Press the Utility button.
c. Press the System softkey.
d. Press the Page 1/2 to access the second page of options.
e. Press the Firmware Update softkey. Or press Store/Recall directly.
f. Select the firmware file (*.ADS) and choose Recall to update the system software.
g. After the updating is finished, the generator will restart automatically.
h. Press Utility → Page 1/2 → Firmware Update. Or press Store/Recall directly.
i. Select the configuration file (*.CFG) and choose Recall to update the configuration file.
j. After the update completes, the generator will restart automatically.
Do not turn off the power while the generator's firmware is being updated.
Figure 49 - System Information Screen
Note: A configuration file (*.CFG) may or may not be included with a given firmware update. If a CFG file is
not included with a firmware update then it will not be required for that specific update.

BK Precision 4054B Specifications

General

Brand	BK Precision
Model	4054B
Category	Portable Generator
Language	English