Black Box LES1608A - Additional Plug-Ins

231
1. 8 7 7. 8 7 7. 2 26 9 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.87 7.2269
CHAPTER 11: NAGIOS INTEGRATION
11.3.3 ADDITIONAL PLUG-INS
Additional Nagios plug-ins (listed below) are available for all LES1516A, LES1532A, LES1548A-, LES1700- and LES1400-series
devices.
TABLE 11-2. ADDITIONAL PLUG-INS
PLUG-IN PLUG-IN PLUG-IN PLUG-IN PLUG-IN PLUG-IN
check_apt check_by_ssh check_clamd check_apt check_by_ssh check_clamd
check_dig check_dns check_dummy check_fping check_ftp check_game
check_hpjd check_http check_imap check_jabber check_ldap check_load
check_mrtg check_mrtgtraf check_nagios check_nntp check_nntps check_nt
check_ntp check_nwstat check_overcr check_ping check_pop check_procs
check_real check_simap check_smtp check_snmp check_spop check_ssh
check_ssmtp check_swap check_tcp check_time check_udp check_ups
check_users
— — — — —
To get these plug-ins from the Nagios plug-ins package, contact Black Box Technical Support at 877-877-2269 or info@blackbox.com
To configure additional checks, the downloaded plug-in program must be saved in the tftp addins directory on the USB flash drive
and the downloaded text plug-in file saved in /etc/config/.
To enable these additional plug-ins:
 Navigate to Serial & Network > Network Port.
 Click Edit for the Network Host to be monitored.
 Select New Checks.
The additional check options will have been included in the updated Nagios Checks list, and you can again customize the arguments.
If you need other plug-ins to be loaded into the LES1516A, LES1532A, LES1548A or LES1700 firmware:
 If the plug-in is a Perl script, it must be rewritten. The console server does not support Perl at this point.
 Individual compiled programs may be generated using gcc for ARM.