262
1. 8 7 7. 8 7 7. 2 26 9 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.87 7.2269
CHAPTER 15: CONFIGURATION FROM THE COMMAND LINE
RADIUSDownLocal
LocalLDAP
LDAP
LDAPLocal
LDAPDownLocal
To configure TACACS authentication:
# config -s config.auth.tacacs.auth_server='comma-separated-list'
comma-separated-list is a list of remote authentiction and authorization servers.
# config -s config.auth.tacacs.acct_server='comma-separated-list'
# config -s config.auth.tacacs.password='password'
comma-separated-list is a list of remote accounting servers. If unset, the Authentication and Authorization Server Address will be
used.
To configure RADIUS authentication:
# config -s config.auth.radius.auth_server='comma-separated-list'
# config -s config.auth.radius.acct_server='comma-separated-list'
# config -s config.auth.radius.password='password'
In the first command, comma-separated-list is a list of remote authentiction and authorization servers.
In the second command, comma-separated-list is a list of remote accounting servers. If unset, Authentication and Authorization
Server Address will be used.
To configure LDAP authentication:
# config -s config.auth.ldap.server='comma separated list'
# config -s config.auth.ldap.basedn='name'
# config -s config.auth.ldap.binddn='name'
# config -s config.auth.radius.password='password'
In the first command, comma-separated-list is a list of remote servers,
In the second command, name is the distinguished name of the search base. For example: dc=my-company,dc=com.
In the third command, name is the distinguished name to bind to the server with. The default is to bind anonymously.
The following command will synchronize the live system with the new configuration:
# config -r auth
15.1.5 NETWORK HOSTS
To determine the total number of currently configured hosts:
# config -g config.sdt.hosts.total
Assume the value returned is 3. If you add another host, increment the total number of hosts from 3 to 4:
# config -s config.sdt.hosts.total=4
If the output is config.sdt.hosts.total, 0 hosts are configured.
To Next Page