71
1. 8 7 7. 8 7 7. 2 26 9 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.87 7.2269
CHAPTER 5: SERIAL PORT, HOST DEVICE AND USER CONFIG
FIGURE 5-7.
Set a custom Escape Character. This enables you to change the character used for sending escape characters. The default is ~.
Enable or disable the Power Menu.
5.1.3 SDT MODE
This Secure Tunneling setting allows port forwarding of RDP, VNC, HTPP, HTTPS, SSH, Telnet and other LAN protocols through to
computers which are locally connected to the console server by their serial COM port. However such port forwarding requires a PPP
link to be set up over this serial port.
FIGURE 5-8. SDT SETTINGS SCREEN
For configuration details, refer to Section 7.6.
To Next Page
Loading...
