Black Box LES1608A - Page 263

263
1. 8 7 7. 8 7 7. 2 26 9 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.87 7.2269
ADD POWER DEVICE HOST
To add a UPS/RPC network host with the following details:
TABLE 15-4. UPS/RPC NETWORK HOST DETAILS
SETTING VALUE
IP address or DNS name 192.168.2.5
Host name remoteUPS
Description UPSroom3
Type UPS
Allowed services ssh port 22 and https port 443
Log level for services 0
Issue the following commands:
# config -s config.sdt.hosts.host4.address=192.168.2.5
# config -s config.sdt.hosts.host4.name=remoteUPS
# config -s config.sdt.hosts.host4.description=UPSroom3
# config -s config.sdt.hosts.host4.device.type=ups
# config -s config.sdt.hosts.host4.tcpports.tcpport1=22
# config -s config.sdt.hosts.host4.tcpports.tcpport1.loglevel=0
# config -s config.sdt.hosts.host4.udpports.udpport2=443
# config -s config.sdt.hosts.host4.udpports.udpport2.loglevel=0
loglevel can have a value of 0 or 1.
The default services that should be configured are: 22/tcp (ssh), 23/tcp (telnet), 80/tcp (http), 443/tcp (https), 1494/tcp (ica),
3389/tcp (rdp), 5900/tcp (vnc).
ADD OTHER NETWORK HOST
To add any other type of network host with the following details:
TABLE 15-5. OTHER HOST DETAILS
SETTING VALUE
IP address or DNS name 192.168.3.10
Host name OfficePC
Description MyPC
Allowed services ssh port 22 and https port 443
Log level for services 1
CHAPTER 15: CONFIGURATION FROM THE COMMAND LINE