5 If pairing the camera to your iPad fails, the camera presents an error message.
Tryconnecting again.
NOTE If you are not using Bluetooth to control your Blackmagic Cinema Camera 6K,
it is a good idea to turn Bluetooth off for the purpose of security.
Disconnect Current Device
Use this setting to disconnect your Blackmagic Cinema Camera 6K from the iPad it is currently
paired with.
Clear Paired Devices
Use this setting to clear the list of devices that your camera has been paired with.
Controlling Your Camera with the Blackmagic Camera Control App
Once you have successfully paired your camera to your iPad, you can change settings, adjust
metadata and trigger record remotely using the iPad app.
Once paired, the Blackmagic Camera Control app will display this screen,
allowing you to adjust your settings and start recording
76Settings
To Next Page
Loading...
