EasyManua.ls Logo

Blackmagicdesign Videohub Master Control Pro - Page 16

Blackmagicdesign Videohub Master Control Pro
92 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Router Control Cable
Remote router control is performed via 10/100Base-T Ethernet or serial. If router control is
performed via Ethernet, the integrated Videohub Server is used. This means you only need to
provide an Ethernet cable to connect Universal Videohub288 to your Ethernet network switch.
Third party router controllers can control Universal Videohub288 via Ethernet, or as an RS-422
slave device, for router crosspoint switching. Please refer to the Developer Information section
of this manual for Videohub and RS-422 protocols.
Power Supply
When fully populated and running at maximum power consumption, Universal Videohub288
can be powered by a single Universal Videohub Power Supply.
The Universal Videohub Power Supply package includes a power card with a single connection
to a 1RU size rack mount chassis which contains the power supply.
The Universal Videohub Power Supply chassis contains a universal power supply for use in all
countries. You will need to provide a standard IEC cord with a C13 connector.
ALARM
REF IN
RS-422
CONTROL
USB DIAGNOSTIC
ETHERNET
POWER OVERLOAD
Universal Videohub288 Crosspoint card Serial Cable
Universal Videohub Power Supply
MAIN POWER
GND
GND
+12V
+12V
+12V
Universal Videohub Power Supply includes a power
card, 1RU chassis and connecting power cable.
Standard RJ45
Ethernet Cable
Building Universal Videohub288
25 rack units of space should be reserved for the installation of Universal Videohub288 and
two rack mount power supply chassis, allowing free space for heat dissipation. Only 23RU
is required if Universal Videohub288 is mounted at the top of an open rack as heat can be
dissipated from the top.
Universal Videohub288 is 18RU high and 6 inches thick. You can rack mount Universal
Videohub288 facing forwards or reversed, or even mount it in the rear of the rack to leave
space for other equipment.
Universal Videohub288 contains electrostatic sensitive devices. It is essential to discharge
yourself of static electricity before handling any of these devices, just as you would when
installing devices into a computer. We recommend the use of an antistatic wrist strap when
handling any of these devices.
16Universal Videohub Routers

Table of Contents

Related product manuals