Bodor i5 Series - Unit of Measurement; Explanation of Illustrations; Conformity of Machine

www.bodor.com/service@bodor
.com
12
4
PLC
Programmable Logic Controller
1.6 Unit of measurement
The quantities in the manual are indicated in international standard units (SI Units). The units of measurement in the manual
are the same as those on the machine.
1.7
Explanation of illustrations
For a better understanding of the manual, the illustrations in the manual are only for a brief description, in which the
protective devices and covers may be removed. In the manual, Bodor Laser does not provide specific dimensions of the
machine.
1.8 Conformity of machine
The machine is designed and manufactured according to the standards in Table 1-4.
Table 1-4 Reference standards
No.
Standard
1
Directive 2006/42/EC(Only CE standards apply)
2
EN ISO 12100: 2010 Safety of machinery - General principles for design - Risk assessment and risk
reduction
3
EN 60204-1:2018 Safety of machinery - Electrical equipment of machines Part 1: General
requirements
4
Directive2014/30/EU(Only CE standards apply)
5
EN IEC 61000-6-4:2019 Generic standards - Emission standard for industrial environments
6
EN IEC 61000-6-4:2019 Generic standards - Immunity for industrial environments
7
IEC 60825-1:2014 Safety of laser products - Part 1: Equipment classification and requirements
8
ISO 11553-1:2020 Safety of machinery - Laser processing machines - Part 1: Laser safety
requirements