www.bodor.com/service@bodor
.com
1) The safety protection measures taken by the machine can only reduce but not completely
eliminate all risks.
2) Check the functions of emergency button and safety light curtain every 72 hours.
3) Check the functions of main power switch and safety door switch every 168 hours.
4) After any maintenance work of removing safety door or other safety protection devices,
reinstall these devices, check whether they are functioning properly, and ensure that they are
in the correct position and in an effective working state.
5) Check the necessary safety functions after replacing any safeguards.
6) Operator should know the position and operation method of emergency stop devices to stop
the machine in case of emergency.
7) Do not stop the machine during usual operation by emergency stop devices.
2.9 Safety instructions for machine lifecycle
During the transportation, installation, operation, adjustment, maintenance and disassembly of the machine, users should
obey the basic safety rules described in the manual, the safety regulations in your country/region and safety preventive
measures as follow.
Disclaimer: Any operation outside of this regulation is regarded as a non-compliance use, and Bodor Laser is not
responsible for the losses caused thereby, especially property losses, personal injuries and production losses. Such
risks are entirely borne by the user.
2.9.1 Transportation
For personal safety and machine transportation safety, delivery personnel should obey the following safety rules besides 2.1
Basic safety rules:
1) Provide suitable storage conditions to prevent machine damage. The storage temperature should be between -25 ~ + 55℃,
and for short periods not exceeding 24 h at up to +70℃.
2) Only qualified and authorized personnel who got safety and skill training can transport the machine;
To Next Page
Loading...
