Bodor i5 Series - Lubrication

www.bodor.com/service@bodor
.com
78
500h
Cleaning of filter screen of the
water-cooling machine
Clean up filter screen of the water-cooling
machine.
500h
Z axis rack, gear cleaning, grease, Z axis
guide rail inspection
Z-axis rack and gear cleaning, grease, check
Z-axis guide rail surface wear, if necessary,
replace the lubricating oil box.
500h
X, Y axis guide rail, X, Y axis gear rack
cleaning and oiling
Check and clean X, Y axis guide rail, X, Y
axis gear rack clean and oil.
500h
Safety grating cleaning
Clean the safety grating surface
1000h
Oil change and cleaning of the
self-lubricating container
Rinse thoroughly the self-lubricating
container, and replace lubricant.
1000h
Clean the oil filter element
Clean the oil filter of the automatic
lubrication system.
2000h
Replace the filter element
Replace the filter element of the cutting air
system.
5000h
Adjustment of X,Y axis gear rack back lash
Check and verify the verticality of X,
Y-axis, and respectively check, verify and
adjust X,Y-axis gear rack back lash.
Every six
months
Cooling device
Replace cooling water (clean circulating
water).
6000h
Filter element replacement
Clean and replace the filter element of the
intake filtration device