Bodor i5 Series - Application of External Functions of the Equipment; USB Interface; Return to Zero; Draught Fan Startup

www.bodor.com/service@bodor
.com
73
II. Application of External Functions of the Equipment
2.1 USB Interface
The production system is not directly connected to the machine tool, but data can be transmitted via the USB interface, and
the wireless key mouse receiver is also inserted into the USB interface to realize wireless operation.
2.2 Return to Zero
After the machine tool is electrified, in order to make the equipment safely move within the stroke, carry out return-to-zero
operation first, open the software, and press the return-to-zero button on the software interface to make the X, Y, Z axes
return to zero automatically.
2.3 Draught Fan Startup
The draught fan starts automatically with the cutting process. After the cutting, the draught fan closes automatically after a
certain time delay, usually without manual control. Note that all axes return to zero before cutting.
2.4 Automatic Focusing
laser heads come with the function of automatic focusing，open the software,Click the layer on the left side of the software,
in the pop-up setting window, you can set the desired focus height,When cutting, it will automatically move to the set focus
position and start cutting.