www.bodor.com/service@bodor
.com
With respect to specific processing procedures, please refer to the Instructions on Operating System in the accompanying
document.
Disclaimer: Please read the Instructions on Operating System before operating the equipment. Any operation other
than those regulated herein shall be considered as non-compliant use; any losses caused thereby, especially property
damage, personal injury, production losses and other risks, shall be solely borne by the user, for which Bodor shall
not be liable.
Note: the operator can find the best parameters (speed, air pressure, focal length, etc.) through multiple tests, thus
improving quality and work efficiency of workpieces. We recommend that the user save the best parameters and
record the focal data at the time of naming, which can be called directly when processing the same material next
time.
To Next Page
Loading...
