www.bodor.com/service@bodor
.com
This Chapter explains the concept of safety, and indicates the measures that should be taken to avoid possible risks. The
āOverview of Other Risksā includes the measures taken by users to avoid other risks.
Tip: Users must comply with the existing regulations of safety and accident prevention of each nation, as well as the safety
regulations of each province and region.
Warning signs and danger signs:
Some actions may cause dangers during operation. Job description usually follows warning signs in the Instructions. Danger
signs are set on the machine tool.
Warning signs include the following warnings:
Danger: Indicates there is severe harm. If it is not avoided, it may cause death or serious injury!!!
Warning: Indicates there is likely to cause
dangerous situations. If it is not avoided, it
may cause serious personal injury or great
loss!
Do not reach in during operation, and cut
off the power before maintenance!
Prohibit users
from inserting or
removing optical
fiber labels
Do not plug or unplug optical fibers!
To Next Page
Loading...
