Bodor i5 Series - Equipment Installation and Connection; Inspection and Acceptance after the Arrival of the Equipment

www.bodor.com/service@bodor
.com
51
II. Equipment Installation and Connection
2.1 Inspection and Acceptance after the Arrival of the Equipment.
Inspection and acceptance of goods in the container: Check whether the packaging of the host equipment in the container is
damaged before unloading. If there is damage, the recipient should take pictures in the container (Photos should be clear).
Check whether the marks of anti-inversion and anti-collision on the packing cases are abnormal (normally, they are
colorless; abnormally, they are red), as shown in the figure below. If those marks are found to be abnormal, the recipient
should take pictures in the container (Photos should be clear).
In case of abnormal marks, keep well the packing cases and clear photos of the damaged location. If the mode of
transportation is air transport, check and confirm whether the equipment is damaged or not on site. Sign to receive after
checking there is no damage. If there is any breakage, please reject it and contact us. If the packing cases of the equipment
for sea or land transportation are damaged or the marks of inversion and anti-collision are abnormal, the recipient should
take pictures and continue to unpack for check; if the equipment is damaged, the recipient should immediately report to the
insurance company specified on the policy and protect the scene. Meanwhile, the recipient needs to contact our customer
service staff at the same time so as to determine the solution.