Bodor i5 Series - Page 20

www.bodor.com/service@bodor
.com
19
32
12.2
14.7
16.8
18.6
20.3
21.9
23.3
24.6
25.8
27
28.1
29.2
30.1
31.1
33
13
15.6
17.6
19.6
21.3
22.9
24.2
25.6
26.8
28
29
30.1
31.1
32.1
34
13.9
16.5
18.6
20.5
22.2
23.8
25.2
26.5
27.7
29
29.5
31.1
32.1
33.1
35
14.9
17.4
19.5
21.4
23.1
24.6
26.2
27.5
28.7
29.9
31
32.1
33.1
34.1
36
15.7
18.1
20.3
22.2
24
25.7
27
28.4
29.7
30.9
32
33.1
34.1
35.2
37
16.6
19.2
21.2
23.2
24.9
26.5
27.9
29.5
30.7
31.8
33
34.1
35.2
36.2
38
17.5
19.9
22
23.9
25.8
27.4
28.9
30.3
31.5
32.7
33.9
35.1
36
37
39
18.1
20.8
23
24.9
26.6
28.3
29.8
31.2
32.5
33.8
34.9
36.2
36.8
38.1
40
19.2
21.6
23.8
25.8
27.6
29.2
30.7
32.1
33.5
34.7
35.8
36.8
38.1
39.1
Bodor recommends that you follow the following measures to extend the life of the laser:
1) In order to ensure a good operating environment for the laser, reduce the risk of condensation, reduce the frequency of
failures, and extend the service life. For equipment with a power of 10,000 watts and above, customers are required to
configure an air-conditioned room with lasers. The air-conditioned room should be spacious enough to allow easy access
to internal maintenance. It can ensure that the minimum free gap around the laser is 1.0m. The air-conditioned room
requires good heat preservation and sealing performance to provide a constant temperature and humidity environment for
the laser. The temperature in the air-conditioned room is required to be ≤ 28 ℃ . Relative humidity ≤ 50%.
2) The water cooler should be placed in a different space from the laser. It is strictly forbidden to place the water cooler in
the air-conditioned room of the laser.
Disclaimer: The damage to the laser caused by the customer's failure to configure an air-conditioned room for the
laser. The resulting losses and various expenses are borne by the customer and are not within the scope of Bodor
Laser's responsibility.