www.bodor.com/service@bodor
.com
4) Perform functional testing.
5) Instruct the operators.
6) The customer shall contact the customer service staff of Bodor to guide the move and disassembly of the equipment if the
customer has this demand. Our company will not be responsible for the warranty if the equipment cannot work or does
not work normally because it has not been moved or disassembled privately by the customer without contacting the
customer service staff of Bodor!!
Tips
It is required to ensure that the amount of lubricant is normal when the machine tool is running, and check it at
regular intervals. The customer is required to perform regular maintenance according to the guide for maintenance
points.
We will not be liable for any problem arising from the failure of maintenance.
To Next Page
Loading...
