www.bodor.com/service@bodor
.com
Job nature: Lubrication/Cleaning, Cleaning and lubrication of Z-axis
guide rail and lead screw.
Interval: 500h/time.
Tools/Materials: Cleaning cloth, grease gun, No. 1 lithium grease,
Guide oil for No.32 machine tool.
Job description: Remove the hood components; clean up the linear
guide rail, slide block and ball screw with cleaning
cloth; lubricate guide rail and ball screw, and add
No. 1 lubricating grease to the guide slide block
with a grease gun.
Maintenance Points 2
Maintenance Points 3
Job nature: Lubrication, Lubrication during the moving process on X,
Y-axis guide rail.
Interval: Configure by system.
Tools/Materials: 32# guide oil.
Job description: Carry out a visual inspection of the quantity of
lubricant on X, Y-axis guide rail; if you need to
adjust it, please contact Bodor engineers.
Job nature: Lubrication/Cleaning, Clean up X, Y-axis rack, gear and
linear guide, and add lubricant to gear rack.
Interval: 500h/time.
Tools/Materials: Cleaning cloth, alcohol, brush, 00# Lithium grease.
Job description: Remove X-axis dustproof cover and Y-axis organ
cover; clean up X, Y-axis rack, gear and linear guide
rail with cleaning cloth; lubricate rack gear after
cleaning.
To Next Page
Loading...
