www.bodor.com/service@bodor
.com
1.5.2 Maintenance Instructions
Maintenance Points 1
Maintenance Points 2
Job nature: Check.Check the circulating water loop pipeline, etc.
Interval: once/week
Tools/Materials: Observation.
Job description: Remove the motor cover blind, and open the head
shell to check the overall circulating water route,
and to make sure no water leakage in water pipe.
Job nature: Cleaning and washing.Clean up the filter screen of the
water-cooling machine (both sides)
Interval: once/quarter
Tools/Materials: Water pipe, cleaning tools, cleaning cloth
Job description: Press the filter screen “Jaw” of the water-cooling
machine, remove the filter screen, and then clean
up the filter screen with clean water.
To Next Page
Loading...
