Bosch DVR-8K - Page 106

104 en | Control Center Digital Video Recorder
F01U | 1.0 | 2007.11 User Manual Bosch Security Systems
Log Out
• Auto user logout: Setting the logout time. You can set the auto logout time to 5 minutes, 10
minutes, 30 minutes or 60 minutes.
Sound settings
Select the beeper options.
• Button beeper: Makes a sound when using the buttons.
• Input beeper: Makes a sound when an input occurs.
• Motion beeper: Makes a sound when motion is detected.
• System beeper: Makes a sound when a cooling fan is not activated or the HDD has bad sector.
Update settings
Set the update options.
• Item Selection: Select the items for updating.
- PTZ Protocol: Set to PTZ Protocol update.
- System fi rmware: Set to System software update.
• Method: Select the update method.
- USB: Update from USB memory stick.
- Network: Update from the update server.
• Update server: Enter the IP address of the update server.
Note:
If you can not update from the update server, check the TCP/IP options and
the IP address of the update server.
User settings
Add User
You can add user.
1. Click the “Add” button. User Setting window is displayed.
2. Enter the User ID and Password.
3. Enter the password again to verify.
4. Select the user level and then click “OK” to confi rm your selection.
Edit the registered User
You can change the User ID, password or user level.
1. Choose the user ID and then click the “Edit” button.
2. Change the ID, Password or User level, then click “OK” to confi rm your selection.
Delete registered User
1. Choose the user ID you want to delete
2. Click the “Delete” button.