Bosch Intuvia 100 - Page 244

MY23P0a -52_1.0_11.10.2022
244
Inspection and maintenance
Technical inspection, checking safety, test ride
Inspection Tests Maintenance Acceptance Rejection
Miscellaneous
Pannier rack
before
each ride
Stability Section 7.1.5 … O.K. Loose Firm
Once a
month
Dirt … Section 7.3.4 O.K. Dirt Cleaning
6 months Maintenance … Section 7.4.3 O.K. Untreated Wax
6 months Check fastening
and paint protection
film
Section 8.5.2 … O.K. Loose Tighten screws, new
paint protection film
Kickstands
Once a
month
Dirt … Section 7.3.4 O.K. Dirt Cleaning
6 months Maintenance … Section 7.4.5 O.K. Untreated Wax
6 months Attachment Section 7.5.20 … O.K. Loose Retighten screws
6 months Stability Section 7.5.20 … O.K. Tips over Change kickstand
height
Bell
before
each ride
Sound Functional
check,
Section 7.1.10.
… O.K. No ring, too
quiet, missing
New bell as specified
in the parts list
Attachments
(optional)
6 months Attachment Check mount
fastening
… O.K. Loose Retighten screws
Components Frequency Description Criteria Measures if rejected
Components Description Criteria Measures if rejected
Assembly/inspection Tests Acceptance Rejection
Brake system
6 months Functional check O.K. No full braking; braking
distance too long
Locate defective part in brake
system and correct
Gear shift under
operating load
6 months Functional check O.K. Problems when shifting
gear
Readjust gear shift
Suspension
components (fork,
shock absorber, seat
post)
6 months Functional check O.K. Suspension too deep or
no longer exists
Locate defective component
and correct
Electric drive system
6 months Functional check O.K. Loose connection,
problems when riding,
accelerate
Locate faulty component in
electric drive and remedy
Lighting system
6 months Functional check O.K. No continuous light, not
bright enough
Locate defective part in lighting
system and correct
Test ride
6 months Functional check No strange
noises
Strange noises Locate source of noise and
correct