Bosch PRAESENSA PRA-CSLD - Diagnose

PRAESENSA Diagnose | en 105
Bosch Security Systems B.V. Configuration manual 2020-09 | V1.20 | PRAESENSA 1.20
6 Diagnose
On the Diagnose pages of the webserver, the system (installation) can be diagnosed.
IMPORTANT: With the exception of Version, only PRAESENSA administrator and installer user
accounts have full access to the Diagnose section. See User accounts, page 38 .
To do so:
Click Diagnose to see the following diagnose menu items:
Diagnose (menu items)
1 Configuration, page 106 Can be used to check the system (controller)
configuration for inconsistencies.
2 Version, page 107 Can be used to check the hardware version of the
connected network devices, their firmware version
and other relevant information.
3 Amplifier loads, page 108 Can be used to calculate the amplifier load (in Watt)
per amplifier output channel.
4 Amplifier spare channel, page
110
Can be used to generate a fault in an amplifier
channel to force spare switching.
5 Battery impedance, page 111 Can be used to check the condition of the connected
12Vdc (back-up) battery to the Multifunction power
supply (Mps).