94 en | Configure the system PRAESENSA
2020-09 | V1.20 | PRAESENSA 1.20 Configuration manual Bosch Security Systems B.V.
5.7.6 Call station
On the Action definitions page of the call station, call station and call station extension actions
could be defined.
Functions and operations
See
Assigning a function, page 85
for functions and
Assigning an operation, page 84
for
operations (behaviors) available for the call station and call station extension.
Configure a call station action
In the General section, the properties of the press‑to‑talk (PTT) button of the call station can
be defined. This button has default the PTT action. To do so:
1. Below the Action definitions configuration page, click call station:
– A screen appears with an overview of the connected call station(s).
2. Select and click the name of the call station to be configured:
– A General section row and, if one or more call station extension(s) connected, call
station extension section rows appearing.
– A Submit button appears.
3. Click the + of the General row:
– A screen appears listed the following items:
4. Select the following items to configure the actions of the Call station Press to talk button.
Item Value Description
Press to talk Static text Shows the name Press to talk (PTT) of the PTT button of the
call station selected and cannot be changed.
Operation Selection Select the operation of the function to be used from the
dropdown list. See
Assigning an operation, page 84
.
Call definition Selection Select the Call definition to be used from the dropdown list.
See
Call definitions, page 81
Depending of the selected Function, different parameters could be selected, entered,
added/removed. See
Assigning a function, page 85
for descriptions.
Submit Button Click the Submit button to store the changes. Note that the
changes are not permanent and active until the configuration
is saved. See
Save configuration, page 102
.
To Next Page
Loading...
