PRAESENSA Getting started | en 29
Bosch Security Systems B.V. Configuration manual 2020-09 | V1.20 | PRAESENSA 1.20
3.2.9 Optional: Install the Open Interface
The Open Interface application software is part of the PRAESENSA optional software. See
(Mandatory) software, page 16
(*.zip). If you want to use the Open Interface with third party
applications, it needs to be installed on your PRAESENSA configuration computer.
To install, proceed as follows:
1. Browse to, and run, the file named: Bosch.OpenInterface‑Net‑installer.exe
– The setup program Open Interface starts.
– Follow the onscreen instructions.
2. A notification is displayed when the installation is finished.
3. Go to
Open interface, page 114
and
Optional: Using the Open Interface, page 132
4. Continue with:
Logon the application, page 35
To Next Page
Loading...
