PRAESENSA Optional: Using OMNEO Control | en 129
Bosch Security Systems B.V. Configuration manual 2020-09 | V1.20 | PRAESENSA 1.20
13 Optional: Using OMNEO Control
How to use/operate OMNEO Control is described in a separate manual, called:
– OMNEO Control Software
– Download the manual (.pdf) from the Bosch download area: https://
licensing.boschsecurity.com/OMNEO/html/load.htm?1000 > OMNEO control Vx.xx >
Manual. See also
Related documentation, page 7
.
Notice!
OMNEO control shows only device hostnames, not e.g. the control hostname of a PRAESENSA
system controller.