42 en | Configure the system PRAESENSA
2020-09 | V1.20 | PRAESENSA 1.20 Configuration manual Bosch Security Systems B.V.
5.2.3 Delete a device
By using the Delete button, the network device, including the unique device hostname, will be
deleted from the system composition and will also be removed from the configuration pages
everywhere it is used.
To do so:
1. Click the row to select the network device to be deleted:
– The row will be highlighted.
2. Click the Delete button:
– A Deleting row appears.
3. Click the Delete button below the row, or click the Cancel button to return:
– Using Delete, the selected network device is permanently deleted from the system.
4. Click the Submit button:
– Notice that the changes are not permanent until the configuration is saved. See
Save
configuration, page 102
.
To Next Page
Loading...
