PRAESENSA Introduction to make an announcement | en 119
Bosch Security Systems B.V. Configuration manual 2020-09 | V1.20 | PRAESENSA 1.20
Normal announcements
Normal announcements typically contain live speech and optionally tones and pre‑recorded
messages. The content of normal announcements is defined by a call definition. See
Call
definitions, page 81
.
Normal announcement is set in
Call station, page 59
> Class > Normal.
Emergency announcements
Emergency announcements are similar to normal announcements. The major difference is that
emergency announcements put the system in the emergency state, if configured. In the
emergency state, PRAESENSA stops all BGM announcements and normal announcements, if
configured.
How the system acts could be set in the configuration >
System settings, page 69
> Emergency
mode. Emergency announcement is set in
Call station, page 59
> Class > Emergency.
10.3 Routing
The routing of the announcement is the set of zones and/or zone group to which the
announcement is intended to be addressed. Whether the announcement actually is addressed
to the selected zones and/or zone group depends on the priority of the announcement.
To Next Page
Loading...
