Bosch PRAESENSA PRA-CSLD - Optional: Using the Logging Server; Start; Main Window

120 en | Optional: Using the Logging Server PRAESENSA
2020-09 | V1.20 | PRAESENSA 1.20 Configuration manual Bosch Security Systems B.V.
11 Optional: Using the Logging Server
The Logging Server application software is part of the PRAESENSA installation software
package (*.zip). To use it, firstly the software needs to be installed on your configuration
computer. See Optional: Install the Logging Server, page 22 .
– IMPORTANT: Only use the PRAESENSA Logging server when connected to PRAESENSA
systems. E.g. the PRAESIDEO Logging server does not work with PRAESENSA.
11.1 Start
The PC automatically starts the Logging Server when the user logs in. To indicate that the
Logging Server has been started and operates correctly, an icon appears in the system tray of
the taskbar of Windows.
When the Logging Server has been started and faults have occurred in the communication
between PRAESENSA and the logging system, the following icon appears:
Start manually
When the PC does not automatically start the Logging Server, proceed as follows to start it
manually:
1. In Windows:
– version <10: Start > Programs > Bosch > PRAESENSA Logging Server.
– version 10: Windows (right mouse click) > File Explorer > c:\ProgramData\Bosch
\PRAESENSA Logging Server.
2. Click Logging Server:
– A new icon appears in the system tray of the taskbar of Windows.
11.2 Main window
Proceed as follows:
1. Double click on the Logging Server icon.
2. When server authentication is enabled, the Logging Server asks for a user name and
password.
Status messages
The main window displays the status of the Logging Server by means of messages:
Message:
The Logging Server is OK.
Description:
The Logging Server operates correctly.
Recommended action:
----