Bosch PRAESENSA PRA-CSLD - High-Level System Characteristics

PRAESENSA Getting started | en 15
Bosch Security Systems B.V. Configuration manual 2020-09 | V1.20 | PRAESENSA 1.20
3.2 Install the system software
The PRAESENSA system software installation procedure consists of the following steps:
1. Check if the computer fulfills the minimum requirements to install and run the
PRAESENSA (related) software. See PC requirements, page 15 .
2. Installation of the (mandatory) software package on the configuration computer. See
(Mandatory) software, page 16 .
3. Installation of the firmware on the system controller and other PRAESENSA network
devices. See Check/Upload the devices firmware, page 20 .
4. Check network and web browser settings, page 30 .
5. Optional: Install the Logging Server, page 22
6. Optional: Install the Logging Viewer, page 23
7. Optional: Install OMNEO Control, page 24
8. Optional: Install (OMNEO) Network Docent, page 25
9. Optional: Install Dante Controller, page 27
10. Optional: Install the Open Interface, page 29
11. Logon the application, page 35
3.2.1 PC requirements
The PRAESENSA software and applications can run on any PC that meets the following
minimum requirements:
Item Minimum requirement
Operating system Microsoft® Windows7, Windows8.1 or Windows10
Professional; 32‑bit or 64‑bit.
– Keep the PC updated with the latest Windows updates.
This makes sure that the PC contains the most recent
version and service packs of the Microsoft® Jet 4.0
database, which is used by the Logging Server. See also
http://support.microsoft.com/common/international.aspx
Processor X86 or X64. Dual core 2.4GHz
Network connection Ethernet 100 base‑T
Internal memory (RAM) 4GB
Free disk space Depends on the amount of events that must be stored, but it is
recommended to have at least 10GB of free disk space.
Screen resolution 1366 × 768 pixels. 16‑bit or 32‑bit color depth