Bosch PRAESENSA PRA-CSLD - Table of Contents; Table of Contents | en

PRAESENSA Table of contents | en 3
Bosch Security Systems B.V. Configuration manual 2020-09 | V1.20 | PRAESENSA 1.20
Table of contents
1
General information 6
1.1 Intended audience 6
1.2 How to use this manual 7
1.3 Related documentation 7
1.3.1 Other related documentation 7
1.4 Training 7
1.5 Copyright notice 7
1.6 Trademarks 7
1.7 Notice of liability 8
1.8 Document history 8
1.9 Software and tool release history 9
1.10 System introduction 10
1.11 Security precautions 10
2
Product overview 13
3
Getting started 14
3.1 Check the hardware 14
3.2 Install the system software 15
3.2.1 PC requirements 15
3.2.2 (Mandatory) software 16
3.2.3 Check/Upload the devices firmware 20
3.2.4 Optional: Install the Logging Server 22
3.2.5 Optional: Install the Logging Viewer 23
3.2.6 Optional: Install OMNEO Control 24
3.2.7 Optional: Install (OMNEO) Network Docent 25
3.2.8 Optional: Install Dante Controller 27
3.2.9 Optional: Install the Open Interface 29
3.3 Check network and web browser settings 30
3.3.1 Ethernet adapter settings 30
3.3.2 LAN settings 31
3.3.3 Web browser settings 32
3.4 Configuration do's and don'ts 33
3.4.1 Use of characters 33
3.4.2 Use unique names 33
3.4.3 Initial values 33
3.4.4 Enable/Disable items (checkbox) 33
3.4.5 Undo changes 33
3.4.6 Deleting items 33
3.4.7 Audio inputs and outputs 34
3.4.8 Use the submit button 34
4
Logon the application 35
5
Configure the system 37
5.1 User accounts 38
5.1.1 Add a user account 38
5.1.2 Delete a user account 39
5.2 System composition 40
5.2.1 Rediscover devices 40
5.2.2 Add a device 41
5.2.3 Delete a device 42